Locknetics 350 Mag Lock

Model 350 is designed for both interior and exterior doors. Anywhere mounting area is limited is a good candidate for this model.

Aluminumm storefront and full glass doors are the most common usage.

Remember both the mag lock and armature need space to mount. Since the mag lock mounts under the frame header space is not usually an issue.

The armature, which mounts to the door does have space considerations

MBS - Magnetic Bond Sensor: Sends a signal the lock and armature are properly engaged.

DSM - Door Status Monitor: Sends a signal when the door is open.

RTD - Relocking Time Delay: A separate unit spliced into the wiring that controls unlock time. If used with a double lock (model 352) both locks will have the same unlock time.

RTD2 - Simply 2 separate RTD's. Used with a double lock (model 352) where each lock must have a separate setting for unlock time period.

L1 LED: Optional light indicating lock is in operation. Only availble with DSM/MBS models. When you have a double mag (model 352), order L2 for two LED's.

Other options include Herculite door bracket, top jamb mounting bracket and filler plates. Look at the product data for more information on these options.